Switches, Hubs, and Modems
1748136 Members
3682 Online
108758 Solutions
New Discussion юеВ

Re: 2824 & 2524 : automatically save config with TFTP ?

 
stephane_12
Occasional Advisor

2824 & 2524 : automatically save config with TFTP ?

Hi.

Is it possible to save automatically configuration of switches with TFTP (or another) ?

Tks

Stephane
4 REPLIES 4
Preston Gallwas
Valued Contributor

Re: 2824 & 2524 : automatically save config with TFTP ?

Have you tried ProCurve manager? It has excellent configuration stores, you can compare captures on dates, etc, configure it to save whenever there are changes, it highlights them and all that jazz.

Worth anyones procurve network in my opinion.
stephane_12
Occasional Advisor

Re: 2824 & 2524 : automatically save config with TFTP ?

Does the "free" version given with switches have this functionality ?


Stephane
Kell van Daal
Respected Contributor

Re: 2824 & 2524 : automatically save config with TFTP ?

The free version doesn't have version handling, thus isn't able to store multiple configurations of the switches. The Plus version does have this feature.
For a simple "workaround", you could use the "CLI" feature of the free version. That feature allows you to execute commands on multiple switches at once like: "copy running tftp etc..". Although I am not sure you can configure it for a recurring schedule as is possible with PCM+.
Ron Kinner
Honored Contributor

Re: 2824 & 2524 : automatically save config with TFTP ?

You might want to look at kiwi cattools.

http://www.kiwisyslog.com/cattools2.htm

The free version is quite good and the pro version is not that expensive.

Ron