Switches, Hubs, and Modems
Showing results for 
Search instead for 
Did you mean: 

2848 fail-over routing

Occasional Contributor

2848 fail-over routing

How do I configure a fail over routing solution with 2 HP2848 ? That the routing works even if one switch is down.
Mohieddin Kharnoub
Honored Contributor

Re: 2848 fail-over routing


In fact the 2800 series has a basic L3 routing between the connected Vlans plus some extra static routes.

L3 redudancy can only be achieved by in the 5300, 344 series With XRRP

Or in the 3500, 5400, 6200 by using VRRP.

The only redudancy you can get is the L2 redudancy with Spanning-Tree.

Good Luck !!!
Science for Everyone