HPE Community
Switches, Hubs, and Modems
1753805 Members
7676 Online
108805 Solutions
New Discussion

2848 only sending broadcast traffic over vlan

 
esmythe_1
Occasional Advisor

‎12-29-2010 02:51 PM

‎12-29-2010 02:51 PM

2848 only sending broadcast traffic over vlan

I've had a 2848 in service for a couple years, but we performed a XenServer upgrade and we're seeing some strange behavior from the switch.

Tagged traffic from Host1 is not getting to Host2 or Host3. I did some port monitoring today and noticed that tagged broadcast traffic was reaching Host2 network port, but tagged ICMP traffic was not.

I'm upgrading our switch software tonight just for kicks (currentlyon I.08.98) but any ideas?

Thanks...
0 Kudos
1 REPLY 1
cenk sasmaztin
Honored Contributor

‎01-01-2011 04:34 PM

‎01-01-2011 04:34 PM

Re: 2848 only sending broadcast traffic over vlan

hi
all procurve switch effuse broaddccast traffic between vlan on tagged port

I recently tested 5400 switch last software version same result
cenk

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.