3-com 4210 stack

[M-B]

Hello,

I would like to stack some 3com 4210 26 ports switches (ref 3CR17333-91).

According to the manual it should be possible.

I managed to build a cluster and in the stack field of the topology I can see : "stack : independent switch".

I can't find any option to build a stack in the CLI interface nor in the web one.

Is it actually possible?

If yes how to do so?

Thanks for your help.

[YuriPaiva]

I had this issue with the 3com 4210-26 ports POE.

I open a Ticket in HPE Support to help on Stacking and Cluster Procedures because the manuals are not very clear.

I Update firmware for the lastest version, is this the same as HPE 3100 Switch Comware 3 file

S4210-CMW310-R2215P12-S168.bin

I have 2 old switches in the storage unit I need to put online in field, this model does not uses XRN.

This Switch you can only create one Vlan-Interface, I use VLAN 2 for Network Manage in all devices and stacking uses a ip pool.

I find some thing in H3C in http://www.h3c.com.hk/Technical_Support___Documents/Technical_Documents/Switches/H3C_S3100_Series_Switches/Command/Command/H3C_S3100-52P_CM-Release_1702-6W100/201004/672788_1285_0.htm#_Toc259371246