3500yl Multiple Gateways

[matt95110]

I recently switched from a mix of old Cisco/Netgear switches to a new 3500yl and 4 2510G-48 switches. Everything is working great with them, but I am also migrating from an old FreeBSD firewall to an ISP-provided Cisco router.

I have five VLANs on my 3500yl:

VLAN 11: 10.10.11.0/24
VLAN 12: 10.10.12.0/24
VLAN 13: 10.10.13.0/24
VLAN 14: 10.10.14.0/24
VLAN 15: 10.10.15.0/24

I am attempting to test several of my VLANs with the new edge device, and I can't seem to figure out how to route just one VLAN through a different gateway. On a Cisco switch, I could have used a route map for this, is there something equivalent on HP? Can I use an ACL to accomplish this?

[Natasha Samoylenko]

Early availability software version K.15.01.0031 for HP ProCurve 3500, 5400, 8200 switches introduce route-map feature.

HP says:
"We anticipate general availability of this software in the second half of 2010"

http://h10144.www1.hp.com/customercare/support/software/summarypages/early-availability15.htm

But this software is still in "Early availability" status.

[matt95110]

Problem solved. Thanks for the help.