HPE Community
Switches, Hubs, and Modems
1753818 Members
8796 Online
108805 Solutions
New Discussion

4108gl Ping and Traceroute

 
Matt Ballou
Occasional Advisor

‎03-02-2005 12:41 AM

‎03-02-2005 12:41 AM

4108gl Ping and Traceroute

Hello. Having some lingering connectivity issues here between Main network (4108gl) and remote Lan's. In essence if I traceroute the host and LAN (10.10.113.x/255.255.255.0), I can ping until I stop the ping. When I restart the Ping in 2 minutes, it seems to forget the route. I did add the route using IP Route on the 4108gl, but it did not seem to work. Also I noticed that this switch will not traceroute or ping to remote LAN at all if I have a manual IP assigned to the switch (using DHCP Works in the above scenario)Ideas?
0 Kudos
1 REPLY 1
Matt Ballou
Occasional Advisor

‎03-03-2005 03:49 AM

‎03-03-2005 03:49 AM

Re: 4108gl Ping and Traceroute

ARP Table appears to be almost totally empty on the 4108gl, with the exception of the port that is connected to the main switch. That port displays 4 dynamic entries, (mail server, file server, remote network router and firewall). Why is the ARP table so small? Shouldn't it display almost every mac address connected to it? I have the switch almost fully populated.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.