41xx switch 7.93 Web interface issue

[jan_68]

Hi,
I've upgraded my 4160s to 7.93 firmware and I have a small problem with the Web Browser interface. Once I am in the Configuration tab the active modules are not displayed in the picture of the switch. It's as if the bays didn't even exist. Anybody has the same problem ? Not a biggie, just wondering. Attached is the picture. Thx

[Ralph Bean_2]

Jan -

What types of modules are actually in the Switch?

Thanks,
Ralph

[jan_68]

Thx for reply.
All my switches have two J4908A 20 port 100/1000 copper and two SFP ports modules. Some with fiber miniGBIC.

[jan_68]

Please see the attachment !!!!

[Jeff Brownell]

Jan,

We have addresses these 2 modules not showing up in the web gui as of G.07.94 (released 2/10). It is not posted to the web yet (might take a month or so) so if you want the fix before it postes to the web, open a support call and refernce this post..

Regards,
Jeff