Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

4208VL 2 VLAN, routing issue, asa 5510

miwh
Occasional Contributor

4208VL 2 VLAN, routing issue, asa 5510

Having an issue routing, can ping switch ip in each vlan, cannot ping any other node on network.

asa @ 192.168.1.10

 

ProCurve Switch 4208vl# sh run

Running configuration:

; J8773A Configuration Editor; Created on release #L.11.20

hostname "ProCurve Switch 4208vl"
module 1 type J8768A
module 3 type J8768A
module 2 type J9033A
module 4 type J8768A
module 5 type J8768A
ip default-gateway 192.168.1.10
ip routing
snmp-server community "public"
snmp-server host 192.168.1.1 "public"
vlan 1
   name "DEFAULT_VLAN"
   untagged A1-A24,B1-B24,C1-C24,D1-D24,E3-E24
   ip address 192.168.1.15 255.255.254.0
   no untagged E1-E2
   ip igmp
   exit
vlan 2
   name "BORLAND"
   untagged E1-E2
   ip address 192.168.4.15 255.255.255.0
   exit
fault-finder bad-driver sensitivity high
fault-finder bad-transceiver sensitivity high
fault-finder bad-cable sensitivity high
fault-finder too-long-cable sensitivity high
fault-finder over-bandwidth sensitivity high
fault-finder broadcast-storm sensitivity high
fault-finder loss-of-link sensitivity high
fault-finder duplex-mismatch-HDx sensitivity high
fault-finder duplex-mismatch-FDx sensitivity high
ip route 0.0.0.0 0.0.0.0 192.168.1.10
spanning-tree
password manager
password operator