Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

5300 mesh

rai
Occasional Contributor

5300 mesh

Hi,
if i use mesh domain on 4 5308, can i use L3 funtion on other ports?
4 REPLIES
OLARU Dan
Trusted Contributor

Re: 5300 mesh

Are you sure you can do meshing with 5300XLs? I know this is not possible with 4108GLs - the only option I have on 4108GLs for redundancy is RSTP. But meshing was possible with the 4000Ms.

Cheers,
Dan
OLARU Dan
Trusted Contributor

Re: 5300 mesh

Are you sure you can do meshing with 5300XLs? I know this is not possible with 4108GLs - the only option I have on 4108GLs for redundancy is RSTP. But meshing was possible with the 4000Ms.

Cheers,
Dan
Dmitry G. Spitsyn
Trusted Contributor

Re: 5300 mesh

Sorry Rai !

But the HP Procurve 5300xl Series product does not support enabling routing and meshing concurrently. If you have meshing enabled (no matter on how many ports) the system will not allow you to enable routing until you disable meshing and vice versa.
I assume you mean routing when you mention L3 function ?

BR,
Dmitry
rai
Occasional Contributor

Re: 5300 mesh

Thanks Dmity