HPE Community
Switches, Hubs, and Modems
1753682 Members
5234 Online
108799 Solutions
New Discussion

Re: 5304XL management interface freeze

 
Igoris_1
Frequent Advisor

‎01-15-2006 07:52 PM

‎01-15-2006 07:52 PM

5304XL management interface freeze

I was managing Procurve switch 5304XL through web interface and while in VLAN config menu I clicked 'modify' button, management interface froze. I was using microsoft internet explorer v6.0. Since then I never could connect to the web interface again. Then I connected through ssh to see what's happening and event log didn't show anything, but CPU util was 93%. I tried to disable and enable web management again and then SSH session froze too. I tried last resort direct cable connection to the switch console port, it allowed me to login but didn't show me any screen and froze too. The only way to recover was 'reset' pin on the switch.
Firmware revision : E.10.04
0 Kudos
1 REPLY 1
Igoris_1
Frequent Advisor

‎01-17-2006 05:31 PM

‎01-17-2006 05:31 PM

Re: 5304XL management interface freeze

This problem was confirmed as a bug by HP EMEA support.
The problem seems to occur when the last port(s) of the last module is part of a trunk/mesh and when a VLAN modification (in the webGUI) is made.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.