Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

5308xl Loopback interface

Marcus_20
Frequent Advisor

5308xl Loopback interface

Hi all!
Is there any way to create one or several loopback interfaces on the 5300xl?

This is needed as source ip for the OSPF process...

Best regards, Marcus
3 REPLIES
SCOOTER
Esteemed Contributor

Re: 5308xl Loopback interface

Marcus,
You don't need to, and no it's not possible.
The router ID will be adv. as OSPF.

Regards,

SCOOTER
Battiston gregor
Occasional Advisor

Re: 5308xl Loopback interface

Hi Marcus

You can configure the:
ip router-id xx.xx.xx.xx
before configuring OSPf so that it will use that ip address for the neighboring

Regards

Gregor
Marcus_20
Frequent Advisor

Re: 5308xl Loopback interface

Thank you both for your replys!

/Marcus