Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

5400zl reboots

5400zl reboots

Anyone here encounter that the 5406zl switch is rebboting after some time? version is K.12.23. I encounter 2 units of 5400zl that reboots after an hour or a month...it happens twice. theres no problem on the power coz only that switch is rebooting. Configuration of that switch is VRRP and no problem with that configuration. HOw can i check if there's a problem on the hardware?
10 REPLIES
cenk sasmaztin
Honored Contributor

Re: 5400zl reboots

Hi Michael

please send me sh tech command print

cenk
cenk

SCOOTER
Esteemed Contributor

Re: 5400zl reboots

Hi Michael,

The SW version is now at K.13.23 and there have been alot of fixes for crashes, I don't know if you made a typo or are running on the 12 version?

Re: 5400zl reboots

please see attached showtech file..
cenk sasmaztin
Honored Contributor

Re: 5400zl reboots

Michael
update your switch K.13.25 software and after resend sh tech command

cenk
cenk

Re: 5400zl reboots

i upgraded the SW version to K.13.44 but the switch still reboots, attached is the showtech file for your reference. Do you have any idea what causes that error message (please see showtech file) and also the reboot?
Franklyn
Frequent Advisor

Re: 5400zl reboots

Hi Michael,

You are having the following crash:

PPC Data Storage (Bus Error) exception vector 0x300:
Stack Frame=0x0853dbb0 HW Addr=0xc3d2e1f0 IP=0x00883908 Task='mIpPktRecv' Task I
D=0x853deb0
fp: 0x0a89df1c

This should have been fixed already with K.13.44:

o Crash (PR_0000009736)

A software exception is sanity check, the code developers usually includes a sanity check that, if the check fails, writes a software exception message to the event log and boot history, and reboots.

I would suggest you contact your local Procurve Support for an elevation, there has been a K.13.45 but it doesnt address your issue

Good Luck!
cenk sasmaztin
Honored Contributor

Re: 5400zl reboots

hi Michael

this crash information include
PPC Data Storage (Bus Error) exception vector 0x300:

I found K1344 update but not find procurve.com and ftp.hp site
I know last update K1325
please return K1325 update and reboot switch after you can write [config)# stack auto-join] command
and retest


CRASHLogfileshow

...Crash Log File Header..........................
Product: ProCurve J8
Name: ProCurve Switch 5406zl
Date: Sep 26 2008 10:02:05
Build: 665
Version: K.13.44
Directory: /sw/code/build/btm(t3a)
CPU: PPC85XX
crash index = 12
boot type = Switch Reset
willBootType = UNKNOWN BOOT
..................................................
CrashRecordPointer (0xffa0928) for Crash Record Index 0
----- Crash Record: 0 at 0xffa0928 -----
crash info = 0xbaabface
subSystem ID = 0
timestamp: 11/03/08 11:24:52
Crash msg: PPC Data Storage (Bus Error) exception vector 0x300:
Stack Frame=0x0853dbb0 HW Addr=0xc3d2e1f0 IP=0x00883908 Task='mIpPktRecv' Task I
D=0x853deb0
fp: 0x0a89960c
CrashRecordPointer (0xffa193c) for Crash Record Index 3
----- Crash Record: 3 at 0xffa193c -----
crash info = 0xbaabface
subSystem ID = 0
timestamp: 10/23/08 05:53:30
Crash msg: Operator cold reboot from CONSOLE session.





show boot-history
Master -- Saved Crash Information (most recent first):
======================================================

SubSystem 0 went down: 11/03/08 11:24:52
PPC Data Storage (Bus Error) exception vector 0x300:
Stack Frame=0x0853dbb0 HW Addr=0xc3d2e1f0 IP=0x00883908 Task='mIpPktRecv' Task I
D=0x853deb0
fp: 0x0a89960c
SubSystem 0 went down: 10/23/08 05:53:30
Operator cold reboot from CONSOLE session.
cenk

Re: 5400zl reboots

can you explain further what do you mean by that?
cenk sasmaztin
Honored Contributor

Re: 5400zl reboots

can you use PCM on network ?
can you use auto copy data from to switch usb flash drive ?
cenk

Re: 5400zl reboots

whats the steps and procedure?