Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

5406zl and wake on lan

5406zl and wake on lan

Hi,

I've just replaced my 5308 switch with a new 5406zl, and now my Altiris wake on lan commands have stopped working across my vlans. I copied the original config as much as possible, and cannot see any differences, apart from LACP being set to off in the 5308. However, I understand it is off by default in the 5406.

Any ideas ?

Thanks,

Tony
4 REPLIES
cenk sasmaztin
Honored Contributor

Re: 5406zl and wake on lan

hi Tony
plase send me sh run print 5400 switch
cenk

Marco Wessel
Valued Contributor

Re: 5406zl and wake on lan

You might have to turn on directed broadcast using 'ip directed-broadcast'.
Holger Hasenaug
Trusted Contributor

Re: 5406zl and wake on lan

Hi Tony

Check that you have a current firmware running:

Take a look at the release notes:
Release K.13.18
Wake-On-LAN (PR_0000004794) â Wake-On-LAN does not always work successfully.

Regards

Holger

Re: 5406zl and wake on lan

Thanks for your help guys. The Directed broadcast seems to have fixed the problem.

Tony