Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

5406zl to 2610 over gbic connect but no traffic

ScottM
Occasional Visitor

5406zl to 2610 over gbic connect but no traffic

Well, New to procurves.

5406 has three vlans:

vlan 1 has no ip address, localhost has ip address 192.168.10.254

2410 has same 3 vlans

all vlans tagged to gbic port on 5410 and 2410

gbics set to 1000dx flow

Link shows up, no joy on traffic from 2410 to 5406.

Questions:

Where to set ip address on 2410 (seems it only does ip addresses in vlans. Create a vlan just for the interconnect?



2 REPLIES
cenk sasmaztin
Honored Contributor

Re: 5406zl to 2610 over gbic connect but no traffic

no needed ip address on gbic link
gbic link connection operation L1 and L2

please send me 5400 and 2610 switch sh run print
cenk

ScottM
Occasional Visitor

Re: 5406zl to 2610 over gbic connect but no traffic

Figured it out... mixing my HP and Cisco metaphors....

I understand no need to assign IP address. Just wondering how to give the ProCurve an IP address for management needs w/o attaching it to VLAN-1

On the 54XX I assigned it via the localhost interface... Which isn't availalbe on the 2410