Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

802.1X using FreeRADIUS

Jeff Carrell
Honored Contributor

802.1X using FreeRADIUS

I'm looking to create an "end-to-end how-to" document for implementing 802.1X on ProCurve switches using FreeRADIUS as the authentication server platform.

I know how to do this using W2K3/8 and have these running in the lab currently.

If anyone would be able to share their FreeRADIUS config file(s) I would be very appreciative!

In addition, I hope someone has not only done standard 802.1X auth, but also dynamic VLAN assignment after user authentication, those configs would be even more helpful.

I'm hoping to implement FreeRADIUS on Ubuntu linux, but i suspect that the basic FreeRADIUS config files would be mostly the same regardless of which linux platform it was running on.

Thank you in advance.

Kind Regards...Jeff
1 REPLY
Javed Padinhakara
Respected Contributor

Re: 802.1X using FreeRADIUS

Jeff:

Not sure if you have come across this whitepaper already, but thought will share it anyway:

"Configuring FreeRadius using IDM"
http://www.procurve.com/NR/rdonlyres/06538B80-6DB0-4AC6-893E-8E8E12A180C6/0/ConfiguringFreeRADIUSwithIDMbyExample_Dec_07_WW_Eng_Ltr.pdf


Hope it helps in some way!

Javed