Switches, Hubs, and Modems
1748000 Members
5039 Online
108756 Solutions
New Discussion юеВ

Re: 802.1x doesn't work after formware upgrade 10.43 to 10.67

 
SOLVED
Go to solution
cenk sasmaztin
Honored Contributor

Re: 802.1x doesn't work after formware upgrade 10.43 to 10.67

I make recently demo configuration for costumer whit H_10_67 software 2626 switch
802.1x&dynamic vlan
please download and watch my demo video

http://www.dosya.tc/802.1x_dynamicvlan.rar.html

no any bug 10_67 software for 802.1x

please look windows event viewer log for IAS service






cenk

cenk sasmaztin
Honored Contributor

Re: 802.1x doesn't work after formware upgrade 10.43 to 10.67

and send me all log print on radius server
cenk

Mario Laniel
Advisor

Re: 802.1x doesn't work after formware upgrade 10.43 to 10.67

Thanks Cenk,

I looked in the event log on the radius (IAS)server and there is nothing, the PC can not get to it because for some reason but if I go with with firware I.10.43 then it authenticate right away.

Thanks for trying Cenk,
Matt Hobbs
Honored Contributor

Re: 802.1x doesn't work after formware upgrade 10.43 to 10.67

It's probably broken, are you using PEAP? If so there is an option in IAS to make it send smaller Framed-MTU which should will workaround the issue, but you should open up a case with HP.
Andr├й Beck
Honored Contributor

Re: 802.1x doesn't work after formware upgrade 10.43 to 10.67

Mario,

have you tried the same setup just without "stacking"? Sourcing RADIUS requests is likely to be complicated by this management hack to hide multiple boxes behind a single IP, so the bug (clearly there is a bug somewhere) might hide in this area (which doesn't get that much testing in the field as get individual management-IP configurations, I assume).

HTH,
Andre.
Mario Laniel
Advisor

Re: 802.1x doesn't work after formware upgrade 10.43 to 10.67

Andr├Г┬й,

I've tried without stacking and it is the same way but with firmware I.10.43 it works without stacking and with stacking.
Mario Laniel
Advisor

Re: 802.1x doesn't work after formware upgrade 10.43 to 10.67

Matt,

I'm using smart cards or other certificate, so I'm using cert which I've generated with microsoft certificates services and it works fine until I put firware I.10.67 on the switches.
Matt Hobbs
Honored Contributor
Solution

Re: 802.1x doesn't work after formware upgrade 10.43 to 10.67

Could be the same, any form of EAP will probably be affected if it's the bug I'm thinking of.
Mario Laniel
Advisor

Re: 802.1x doesn't work after formware upgrade 10.43 to 10.67

Hi Matt,

I'm willing to give it a try, I've looked around in IAS and didn't see anything pertaning to your option.

How would one go about turning that option on?

Thanks,
Mario
Mario Laniel
Advisor

Re: 802.1x doesn't work after formware upgrade 10.43 to 10.67

Matt,

You were right, I found where to change the MTU size and I set it to 1400 and everything works just fine now with firmware I.10.67.

Thank you very much,

P.S. I still have a case open with HP as I believe that it should work without having to modify that option.

Mario,