Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

802.1x impossible getting in authenticator mode

SOLVED
Go to solution
DonKiShoot
Occasional Advisor

802.1x impossible getting in authenticator mode

Hello,

On my Procurve 2650, i can't put my interface in authenticator for trying to use 802.1x
This is what append :

# aaa port-access authenticator 41 unauth-vid 1
Port 41 is not an authenticator.

Why can't i put my interface 41 in authenticator mode ?
Someone has an idea ?

#############################################

# sh ver
Image stamp: /sw/code/build/fish(mf_v10_fishp)
May 11 2007 10:06:39
H.10.38
575
Boot Image: Primary

interface 41
name "MOI (B12.09)"
no lacp
exit

aaa authentication port-access eap-radius
radius-server key radius
radius-server host 10.1.10.1 key radius
aaa port-access authenticator active

2 REPLIES
ekm101
Senior Member
Solution

Re: 802.1x impossible getting in authenticator mode

Hi
You need to specify the port as an authenticator first.

#aaa port-access authenticator 41
#aaa port-access authenticator 41 unauth-vid 1

That should work
DonKiShoot
Occasional Advisor

Re: 802.1x impossible getting in authenticator mode

Ok thank you very much, it was the tip ;-)