Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

802.1x snmp traps with 2650

Nikil Deo
Occasional Advisor

802.1x snmp traps with 2650

Hi,
We are setting up 802.1x authentication on a procurve 2650.

Is it possible fo the switch to send an snmp trap when 802.1x succeeds or fails?

We would like to setup a notifcation whenever a failure is logged.
If not possible, is there another way to acheive this functionality?

Thanks
2 REPLIES
cenk sasmaztin
Honored Contributor

Re: 802.1x snmp traps with 2650

hi Nikil
802.1x operation sucessfully or fail send message on switch log table
you want this log table all info or some info to send trap you can make snmp config on switch and you can use network management program (like procurve manager)


cenk

ftp://ftp.hp.com/pub/networking/software/2600-2800-4100-6108-MgmtConfig-Oct2005-59906023.pdf
cenk

Mohieddin Kharnoub
Honored Contributor

Re: 802.1x snmp traps with 2650

Hi

The RADIUS Server's log will be more than enough for such information.

Good Luck !!!
Science for Everyone