Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

9304 unmapped devices on PCM+

GUILLEMOT
Occasional Visitor

9304 unmapped devices on PCM+

Hello,

I'm using PCM+ on a Procurve network (2x9308, 2x5308, 36x2824).

The discovery is OK but my 9304 don't appear on the map with the 5308 and the 2824: they stay on the "unmapped device" part of the screen.

I'm using the latest firmware on every switch and I enabled CDP and FDP on the 9304s. FYI, I'm using RSTP / 802.1w.

Any suggestion would be appreciated.

Thanks in advance,

JM
1 REPLY
GUILLEMOT
Occasional Visitor

Re: 9304 unmapped devices on PCM+

I (partially) found the solution.

I had to clear the fdp/cdp table first :

switch#clear fdp table

However, just one of the 9304 appeared on the map.