HPE Community
Switches, Hubs, and Modems
1753394 Members
7165 Online
108792 Solutions
New Discussion

Re: 9304m Firmware

 
Justin Nelson
Occasional Contributor

‎05-13-2004 03:23 PM

‎05-13-2004 03:23 PM

9304m Firmware

I'm looking at upgrading the firmware on my 9304m to the latest version and read a few messages about problems with the 10/100 cards and the 802.1w support with the 7.6.04c release. Is there a newer release that I should use in place of 7.6.04c? If there is, can someone please email it to justin at clearreach.net Thanks

Justin
0 Kudos
1 REPLY 1
SCOOTER
Esteemed Contributor

‎05-13-2004 10:21 PM

‎05-13-2004 10:21 PM

Re: 9304m Firmware

Hello Justin,

Youre info is correct and there is a newer code but that did apparently not fix the problems. If I would be you, and not having problems on the network, I'd wait for the release on the web. Or contact HP-support if you do experience problems that might be fixed in the newer release then the C-code.

Regards,

SCOOTER
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.