9315m and ProCurve Manager Plus

[Joel Belizario]

Hi all,

I've been trying to scan the config of a 9315m into ProCurve Manager but it keeps failing with a timeout.

I have tested the communication paramters and everything tests OK.

All other switches (2500, 2600, 2800, 4100, and 5300s) scan with no issues.

Any suggestions?

Cheers,
Joel

[Mohieddin Kharnoub]

Hi

Usually in the 9300 switches, the Set or Read Write community settings should be ok on and configured correctly in PCM.

Good Luck !!!

[Joel Belizario]

Yes I've checked they are working correctly - I can even add more SNMP communities to the 9300 and define them as management communities too.

The only thing I can think of is something is blocking the TFTP transfer from the switch?

[Jonathan Axford]

Hi Joel,

Have you configured the super-user password setting?

The 9300 series had problems with PCM+ as far as i can remember if you had the global super-user-password set you also need a write community set with the same value.

Or alternatively, delete the global super-user password setting.

I am not sure if they have updated this yet, i haven;t worked with 9300's for a while now.

Cheers

Jonathan