Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
Showing results for 
Search instead for 
Did you mean: 

9315m and ProCurve Manager Plus

Joel Belizario
Trusted Contributor

9315m and ProCurve Manager Plus

Hi all,

I've been trying to scan the config of a 9315m into ProCurve Manager but it keeps failing with a timeout.

I have tested the communication paramters and everything tests OK.

All other switches (2500, 2600, 2800, 4100, and 5300s) scan with no issues.

Any suggestions?

Mohieddin Kharnoub
Honored Contributor

Re: 9315m and ProCurve Manager Plus


Usually in the 9300 switches, the Set or Read Write community settings should be ok on and configured correctly in PCM.

Good Luck !!!
Science for Everyone
Joel Belizario
Trusted Contributor

Re: 9315m and ProCurve Manager Plus

Yes I've checked they are working correctly - I can even add more SNMP communities to the 9300 and define them as management communities too.

The only thing I can think of is something is blocking the TFTP transfer from the switch?
Jonathan Axford
Trusted Contributor

Re: 9315m and ProCurve Manager Plus

Hi Joel,

Have you configured the super-user password setting?

The 9300 series had problems with PCM+ as far as i can remember if you had the global super-user-password set you also need a write community set with the same value.

Or alternatively, delete the global super-user password setting.

I am not sure if they have updated this yet, i haven;t worked with 9300's for a while now.


Where there is a will there is a way...