Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

A unique 1810g-24 problem

owen keefer
Occasional Contributor

A unique 1810g-24 problem

Greetings;

Sometimes I change pvid values for ports.

Later, sometimes (not always), I check the port mirroring page and find out that the port I changed is now classified as a mirror port.
Shouldn't be. I go back in and simply turn it off and everything is fine.

Is this normal or is this a firmware problem?

Current firmware on 4 switches: 1.14

Thanks...
1 REPLY
Patrick Terlisten
Honored Contributor

Re: A unique 1810g-24 problem

Hello,

do you have this on all switches? If yes, log a call at HP and ask for firmware release P1.15.

Regards,
Patrick
Best regards,
Patrick