HPE Community
Switches, Hubs, and Modems
1753797 Members
7350 Online
108805 Solutions
New Discussion

ACL CONVERTION - cisco TO HP

 
DanRojas
Occasional Contributor

‎09-04-2013 09:46 AM

‎09-04-2013 09:46 AM

ACL CONVERTION - cisco TO HP

hello to all

Spoiler
 

I need to do the conversion  cisco acls in a provision, I have done quite well, but I can not get the conversion to these lines:

 

permit udp any host 10.10.2.5 eq netbios-ns
permit udp any host 10.10.2.5 eq netbios-dgm

permit tcp any 172.20.33.0 0.0.0.127 eq lpd

permit udp any any eq isakmp
permit udp any any eq non500-isakmp

 

 

the yellow words dont appear on provision. I'm doing a lab with 2910, the end customer has a 8212.

 

any recommendations?

greetings.

0 Kudos
1 REPLY 1
Vince_Whirlwind
Trusted Contributor

‎09-04-2013 02:47 PM

‎09-04-2013 02:47 PM

Re: ACL CONVERTION - cisco TO HP

Use the actual port numbers,

netbios-ns = 137

netbios-dgm = 138

lpd = 515

isakmp = 500

non500-isakmp = ?4500?

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.