Switches, Hubs, and Modems
1745866 Members
4484 Online
108723 Solutions
New Discussion

ACL problem using Procurve 5304XL

 
Andrew Knyzev
New Member

ACL problem using Procurve 5304XL

I have Procurve Switch 5304XL, SW ver. 9.03.
I've discovered some problems when creating ACLs.
I try to do this:

no ip access-list standard demo
ip access-list standard demo
permit host 10.0.98.50
permit 10.0.0.0 0.0.0.255
deny 10.0.0.0 0.255.255.255
permit any
exit

But the "deny" clause is not accepted and I recieve:
"Duplicate access control entry."

Do I do something wrong or it's a bug ?
1 REPLY 1
Kell van Daal
Respected Contributor

Re: ACL problem using Procurve 5304XL

I tried copy-paste on a 5300 switch, and I didn't get any errors.
I used a switch with firmware version 09.22
You are using an old firmware, so the problem will probably be gone with a firmware update.