Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Access List

SOLVED
Go to solution
ACL
Occasional Advisor

Access List

I have a 2810-switch. and with this i created vlan 1,2&3. Now I want to give access from vlan 1 to vlan2&3, and also want to restrict the access from vlan 2,3 to vlan 1. Is it possible in HP2810? If not which model will support this?
4 REPLIES
Natasha Samoylenko
Trusted Contributor
Solution

Re: Access List

2810 doesn't support ACL.

2610 and 2910al support ACL, but you can apply them only to port, not to VLANs.

Layer 3 switches (3500, 5400, 8200) support ACLs and you can apply them in this switches on ports or VLANs.
ACL
Occasional Advisor

Re: Access List

Are you sure we can not apply ACL on VLAN's in 2610 and 2910.
Natasha Samoylenko
Trusted Contributor

Re: Access List

Yes.

And for confidence I one again check docs and release notes.
You can apply ACLs only on interface in 2910 and 2610.

If you need to filter traffic between VLANs on this models, you can apply ACL on all port on that VLAN. May be this help
ACL
Occasional Advisor

Re: Access List

Thanks-a-lot...