Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Banner on HP Procurve 4100gl switches

Jeph
Occasional Visitor

Banner on HP Procurve 4100gl switches

Please help. We have HP Procurve 4100gl Switches with IOS G.07.93 but they do not support the “banner motd “ command,
Is there another way of configuring the security banner?
3 REPLIES
Johan Guldmyr
Honored Contributor

Re: Banner on HP Procurve 4100gl switches

Looked through the manual for other commands (http://www.hp.com/rnd/pdfs/CLI_reference.pdf) but nothing is visible there.

Maybe it's possible to get this done through another program? Like if you have profiles setup for each switch, then maybe you can setup a warning while connecting to it in that program?
Jeph
Occasional Visitor

Re: Banner on HP Procurve 4100gl switches

Thanks you for the work around.
May you please advise of such a program which could be used to achieve this?
Another problem about this is that a would be attacker may not have access to this program and not see the security banner.
Johan Guldmyr
Honored Contributor

Re: Banner on HP Procurve 4100gl switches

Hi, sorry don't know of a program that you can do this with :/