Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Best Practice for configuring HP procurve with Cisco switch

SOLVED
Go to solution

Best Practice for configuring HP procurve with Cisco switch

Hi,
Can any one help me what is the best practice for configuring HP procurve with Cisco.

1.what type of STP we want to use in both procurve switch & cisco switch.(whther we want to use mst in both the switch or we can use any other method)
2.we will configure tagged port in procurve & trunck port in cisco for connecting uplinks.(any configuration is required in cisco & procurve other then this)
3.how to configure trunck port in procurve for load balancing in uplinks which is connected to cisco.
4.did HP 5412’s support a forced version of STP which is compatible with our existing cisco PVST.

in above setup core switch is cisco & we are using Procurve as access switch.

if any one give command line for this it will be great help....
2 REPLIES
DSV12
Frequent Advisor

Re: Best Practice for configuring HP procurve with Cisco switch

Thanks for reply...
can we configure PVST in cisco & Rstp in HP procurve...

what will be the impact if we configure this.