Blinking (3Hz) Orange LED on Radio Port 210

[Matias Hannus]

I have a radio port (210) that isn't working properly. I have tried changing the radio port to a new one but the problem remains unchanged. The orange LED is blinking about three times per second. However, I can't find this fault code in the manual?!? Does anyone have a clue what's going on?

The radio port is connected to a HP 2610-24/12PWR switch.

[Dmitry G. Spitsyn]

Hi, Matias !

It looks like a startup error.
Startup errors occur when the radio port is unable to communicate with a compatible wireless services-enabled switch, or when the radio port successfully communicates to a compatible switch but WESM module of the switch is not able to adopt and manage the radio port.
Try to connect your radio port directly to the wireless services-enabled switch.
Before the WESM module will be able to adopt your radio port WESM's "country-code" parameter should be properly configured.

Good luck,
Dmitry

[Matias Hannus]

Thank you Dmitry, you lead me in the right direction. I had run out of licenses in the WES-module. Problem solved.