HPE Community
Switches, Hubs, and Modems
1752793 Members
6431 Online
108789 Solutions
New Discussion

Bug in C.09.19

 
Scott Fernandes
New Member

‎09-06-2003 10:42 AM

‎09-06-2003 10:42 AM

Bug in C.09.19

I've found a somewhat minor bug in the C.09.19 firmware. If using SNTP, the switch will not contact the SNTP server after upgrading. You must disable SNTP, save, and re-enable SNTP in order for the time to synch up. This does not happen consistently....about 50% of the time on the 1600M, 2424M and 4000M. Not a big deal, but thought I'd make everyone aware.
0 Kudos
1 REPLY 1
Jerome Henry
Honored Contributor

‎09-07-2003 08:08 AM

‎09-07-2003 08:08 AM

Re: Bug in C.09.19

Thanks for the info, Scott !

:]]

J
You can lean only on what resists you...
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.