Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Bug in C.09.19

Scott Fernandes
Occasional Visitor

Bug in C.09.19

I've found a somewhat minor bug in the C.09.19 firmware. If using SNTP, the switch will not contact the SNTP server after upgrading. You must disable SNTP, save, and re-enable SNTP in order for the time to synch up. This does not happen consistently....about 50% of the time on the 1600M, 2424M and 4000M. Not a big deal, but thought I'd make everyone aware.
1 REPLY
Jerome Henry
Honored Contributor

Re: Bug in C.09.19

Thanks for the info, Scott !

:]]

J
You can lean only on what resists you...