HPE Community
Switches, Hubs, and Modems
1751942 Members
4971 Online
108783 Solutions
New Discussion юеВ

Can I upgrade 9300 switches from Procurve Manager Station?

 
Guillermo Azc├бrraga
Occasional Advisor

тАО02-08-2005 11:47 PM

тАО02-08-2005 11:47 PM

Can I upgrade 9300 switches from Procurve Manager Station?

Can I upgrade 9300 switches from Procurve Manager Station?
My 9300 are discovered in PCM and everything seems to be working OK however
- There is no way to scan their configuration.
- It does not seem to be possible to upgrade them from PCM
Are they, or are they not supported these operations on PCM?
If they are, what configuration is needed on the switch?
0 Kudos
2 REPLIES 2
Guillermo Azc├бrraga
Occasional Advisor

тАО02-09-2005 12:21 AM

тАО02-09-2005 12:21 AM

Re: Can I upgrade 9300 switches from Procurve Manager Station?

I have managed to answer the question myself. For some reason the 9300 performs an extra password check (separate from the rw coomunity) when polled for the configuration.
The following command will solves both problems

no snmp-server pw-check

0 Kudos
Guillermo Azc├бrraga
Occasional Advisor

тАО02-14-2005 12:17 AM

тАО02-14-2005 12:17 AM

Re: Can I upgrade 9300 switches from Procurve Manager Station?

For some reason the 9300 performs an extra password check (separate from the rw coomunity) when polled for the configuration.
The following command will solves both problems

no snmp-server pw-check
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.