HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Can't add 5308xl VLAN secondary ip address

 
Randy Johnson_2
Occasional Visitor

Can't add 5308xl VLAN secondary ip address

When I try to add a secondary ip address to any of the VLANs on my 5308xl, I see something like this:

HP ProCurve Switch 5308XL(vlan-2)# ip address 10.1.250.1/24 secondary
Invalid input: secondary

Do I need to enable something to allow multinetting? I have done this extensively on our Cisco routers, what am I missing here?

I'm running E.06.03.

Thanks in advance!
1 REPLY
Randy Johnson_2
Occasional Visitor

Re: Can't add 5308xl VLAN secondary ip address

I can answer my own question, hopefully to the benefit of others on the forum. Taking a close look (belatedly) at the Releases Notes, I see that the syntax for assigning secondary addresses changed in E.06.01 (p. 17 of the E.07.21 Release Notes). That would do it...