Switches, Hubs, and Modems
1748264 Members
4101 Online
108760 Solutions
New Discussion

Can't delete Trap receiver on switch 2424 and 4000m

 
Marc Villeneuve_1
Regular Advisor

Can't delete Trap receiver on switch 2424 and 4000m

Hi.
I have a problem on 4 switches. I want to delete some trap receiver because they are not useful and I cant delete them. I have tried with PCM and in the setup with telnet. I saw that the community name of the trap I cant delete, have a @ in the name(like public@yyy).

Is there any way to delete them without reseting all the configuration? like in the CLI?

Tx
Marc
1 REPLY 1
Kell van Daal
Respected Contributor

Re: Can't delete Trap receiver on switch 2424 and 4000m

I don't have a 4000m or 2424 here to test, but if everything else fails, you can allways put the config on your pc, edit it and put it back. You can do that in the cli. (menu option 5, then 4 to get there). The commands are put and get.
The section you want to edit looks something like:

TRAPS (

TRAPADDR (
IP_ADDR=10.10.10.1
COMMUNITY=public
)

TRAPADDR (
TRAPADDR_ID=2
IP_ADDR=10.10.10.2
COMMUNITY=public
)

Just remove the entries you do not need anymore, and then put the config back on the switch.

Hope this helps.