- Community Home
- >
- Networking
- >
- Legacy
- >
- Switches, Hubs, Modems
- >
- Cisco Pix 506E firewall configuration
Switches, Hubs, and Modems
1753735
Members
4677
Online
108799
Solutions
Forums
Categories
Company
Local Language
back
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Discussions
back
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Blogs
Information
Community
Resources
Community Language
Language
Forums
Blogs
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
08-26-2005 12:59 AM
08-26-2005 12:59 AM
Cisco Pix 506E firewall configuration
Hi
I have been working on the configuration of the Pix 506E.
and the scenerio of the connection is as follows.
We have clients who are supposed to be connecting to our server through the Firewall.
OUTSIDE==> PIX ==> INSIDE ==>SERVER.
the pix is in between hubs from both sides.
Now using the following configuration Iam only able ping the inside address but I can't ping the server.
Below is the configuration:-
#hostname hqdev
#domain-name hqdev
#enable password ****
#nameif ethernet0 outside security0
#nameif ethernet100 inside security100
#interface ethernet0 auto
#interface ethernet1 auto
#ip address outside 194.25.25.2 255.255.255.0
#ip addres inside 10.10.1.2 255.255.255.0
#name 10.10.1.25 hqdev
#name 194.25.25.25 client
#name ??? pix-gateway Note: that I didn't indicate the gateway since I don't know it.
#route inside 0.0.0.0 0.0.0.0 pix-gateway 1
#static(inside,outside) client hqdev
#access-list client permit tcp any host client
#access-list client permit udp any host client
#access-list client permit icmp any any
#access-group client interface inside
#access-group client interface outside
#telnet 10.10.0.0 255.255.255.128 inside
#telnet timeout 10
#wr memory.
This was the steps I took to configure the Pix.
Quetsions are:
1. since the pix is between the hubs which Ip address should I use as the gateway?
2. I can only ping up to 194.25.25.2 but I can't ping 194.25.25.25 which is the server. where Iam I missing it? Please help
Thanks for your usual support.
Regards
Bonnie.
I have been working on the configuration of the Pix 506E.
and the scenerio of the connection is as follows.
We have clients who are supposed to be connecting to our server through the Firewall.
OUTSIDE==> PIX ==> INSIDE ==>SERVER.
the pix is in between hubs from both sides.
Now using the following configuration Iam only able ping the inside address but I can't ping the server.
Below is the configuration:-
#hostname hqdev
#domain-name hqdev
#enable password ****
#nameif ethernet0 outside security0
#nameif ethernet100 inside security100
#interface ethernet0 auto
#interface ethernet1 auto
#ip address outside 194.25.25.2 255.255.255.0
#ip addres inside 10.10.1.2 255.255.255.0
#name 10.10.1.25 hqdev
#name 194.25.25.25 client
#name ??? pix-gateway Note: that I didn't indicate the gateway since I don't know it.
#route inside 0.0.0.0 0.0.0.0 pix-gateway 1
#static(inside,outside) client hqdev
#access-list client permit tcp any host client
#access-list client permit udp any host client
#access-list client permit icmp any any
#access-group client interface inside
#access-group client interface outside
#telnet 10.10.0.0 255.255.255.128 inside
#telnet timeout 10
#wr memory.
This was the steps I took to configure the Pix.
Quetsions are:
1. since the pix is between the hubs which Ip address should I use as the gateway?
2. I can only ping up to 194.25.25.2 but I can't ping 194.25.25.25 which is the server. where Iam I missing it? Please help
Thanks for your usual support.
Regards
Bonnie.
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.
News and Events
Support
© Copyright 2024 Hewlett Packard Enterprise Development LP