Switches, Hubs, and Modems
Showing results for 
Search instead for 
Did you mean: 

Clear Setting on a HP 1905 switch

Occasional Contributor

Clear Setting on a HP 1905 switch

I just bought a HP v1905-48 switch. While I was testing some setting, I stupidly marked untag on all port of vlan1,

it make me unable to access the switch by web thought it's IP. Are there any other way I could clear the setting, or access it on other way?

Richard Brodie_1
Honored Contributor

Re: Clear Setting on a HP 1905 switch

There's a console port, and it should have shipped with an RJ45/DB9 console cable. 



38,400 baud (bits per second)
8 data bits
no parity
1 stop bit
no hardware flow control


 Apprarently "restore default" is the CLI option for a factory reset, if you can't figure out how to undo what you've done. Good luck!