Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Client upgrading from Cisco to HP...how can I modify the existing Cisco configuration for HP devices

vectorstaging
Occasional Visitor

Client upgrading from Cisco to HP...how can I modify the existing Cisco configuration for HP devices

 
3 REPLIES
Fredrik Lönnman
Honored Contributor

Re: Client upgrading from Cisco to HP...how can I modify the existing Cisco configuration for HP dev

What?

---
CCIE Service Provider
MASE Network Infrastructure [2011]
H3CSE
CCNP R&S

Arimo
Respected Contributor

Re: Client upgrading from Cisco to HP...how can I modify the existing Cisco configuration for HP dev

I'm not aware of any way. The command structure and hierarchy are different in Cisco and HP devices. You need to create the configuration from scratch.


HTH,

Arimo
HPE Networking Engineer
Jeff Carrell
Honored Contributor

Re: Client upgrading from Cisco to HP...how can I modify the existing Cisco configuration for HP dev

A good source of info, the HP Networking and Cisco CLI Reference Guide.

 

CLI ref of ProVision, Comware5, and Cisco in side-by-side comparison. Not all inclusive, but alot of the "daily" config needs.  ....and it's free!

May not cover every command/config option you have, but should get you started.

 

hth...Jeff

https://h30590.www3.hp.com/product/HP+Networking+and+Cisco+CLI+Reference+Guide-PDF-6997