Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Configuration help required using 5308 and 2524 Switchs

MBREDDY_1
Occasional Visitor

Configuration help required using 5308 and 2524 Switchs

Hi
I am looking for help in configuring these Switchs as per the connecting diagram attached along with the required results. Please suggest in case there are any design modifications required.
Thanks in Advance
Regards
1 REPLY
Matt Hobbs
Honored Contributor

Re: Configuration help required using 5308 and 2524 Switchs

For this type of design you're going to need ACL's.

On site 2 the 2626 does not support ACL's, so you would need to use the 7102 to do this. Since there are just 2x 10/100 ports on these routers your performance will be limited to this.

Instead of the 2626 you may want to use a 3400 or another 5300 which support ACL's.