Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Configure ACL on a specific port - 5304XL

SOLVED
Go to solution
Anders81
Occasional Contributor

Configure ACL on a specific port - 5304XL

Hello!

I need to configre an static port ACL on one specific interface on my 5304XL.

This port is in my management VLAN but only needs to access two specific hosts.

I have checked this document (http://cdn.procurve.com/training/Manuals/3500-5400-6200-8200-ASG-Jan08-10-ACLs.pdf)
But the commands are missing in the 5304XL CLI. (I cant bind the ACL in the interface submenu)


I really dont want to create a VLAN ACL, just need to do this for one port..

Is this possible for the 5304XL model?

Thanks
2 REPLIES
Matt Hobbs
Honored Contributor
Solution

Re: Configure ACL on a specific port - 5304XL

The only way you can create a per-port ACL on the 5300 is with a RADIUS assigned ACL.

Have you looked at source port filtering instead? It might do the job in this case.
Anders81
Occasional Contributor

Re: Configure ACL on a specific port - 5304XL

Thanks Hobb, I'll check into that