Configure a ProCurve 6120XG Blade Switch like a Pass-thru

[Emanuele Morganti]

I have a Superdome2 with 2 ProCurve 6120XG Blade Switch, i need to configure some ports of this switch like a simply pass-thru.

Does anyone know how to do it?

Thanks in advance for any help.

Emanuele.

[Torsten.]

I don't know much about the procurves (but the manual does), but IMHO the

AT084A HP Integrity 10Gb Pass-Thru Module

would be the better choice for this, see

http://h18004.www1.hp.com/products/quickspecs/13682_div/13682_div.HTML

[Vivek_Pendse]

Hi,

It's not possible to use it as pass-thru.
But, if you are getting the link from level2 switch (shared link), then you can simply put all the ports in default vlan with untagged.

Try it & let me know.

Thanks,
Vivek

[Emanuele Morganti]

First of all, thanks for the tips.
Sorry if I reply late.

We decided to put the new passtrhu.
While waiting for the new HW, we used the default vlan.

Thanks,
Emanuele.