Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Configure a ProCurve 6120XG Blade Switch like a Pass-thru

Emanuele Morganti
Occasional Contributor

Configure a ProCurve 6120XG Blade Switch like a Pass-thru

I have a Superdome2 with 2 ProCurve 6120XG Blade Switch, i need to configure some ports of this switch like a simply pass-thru.

Does anyone know how to do it?

Thanks in advance for any help.

Emanuele.
3 REPLIES
Torsten.
Acclaimed Contributor

Re: Configure a ProCurve 6120XG Blade Switch like a Pass-thru

I don't know much about the procurves (but the manual does), but IMHO the

AT084A HP Integrity 10Gb Pass-Thru Module

would be the better choice for this, see

http://h18004.www1.hp.com/products/quickspecs/13682_div/13682_div.HTML

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Vivek_Pendse
Valued Contributor

Re: Configure a ProCurve 6120XG Blade Switch like a Pass-thru

Hi,

It's not possible to use it as pass-thru.
But, if you are getting the link from level2 switch (shared link), then you can simply put all the ports in default vlan with untagged.

Try it & let me know.

Thanks,
Vivek
Emanuele Morganti
Occasional Contributor

Re: Configure a ProCurve 6120XG Blade Switch like a Pass-thru

First of all, thanks for the tips.
Sorry if I reply late.

We decided to put the new passtrhu.
While waiting for the new HW, we used the default vlan.

Thanks,
Emanuele.