Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Configuring HP 1920S snmp community (v2c)

 
New Member

Configuring HP 1920S snmp community (v2c)

Hello,

i'm currently testing a HP 1920S switch and snmp. I removed the default snmp (private and public) to add a community (imposed by our security team) (let's say test)

 The community entry would then be :

community : test

security : test

Groupname : defaultread

IP Address : 10.172.160.4.  

But I have this error when testing snmp :

SNMPv2-SMI::mib-2 = No more variables left in this MIB View (It is past the end of the MIB tree)

Can anybody know why ?

 

Thank you

1 REPLY 1
Honored Contributor

Re: Configuring HP 1920S snmp community (v2c)

What software version is your HPE OfficeConnect 1920S Switch currently running on?


I'm not an HPE Employee
Kudos and Accepted Solution banner