Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Configuring IAS and using radius authentication for nortel baystack 5510

Partha Chauhan
Occasional Visitor

Configuring IAS and using radius authentication for nortel baystack 5510

We have nortel Baystack switches 5510 and RADIUS Server(windows 2003 server "IAS") to authenticate switch access.we configured the Nortel switch as a RADIUS client in IAS. Used the same shared secret on both the switch and the IAS server.In remote access policy, used EAP as authentication method.
but it didn't work Also used MD5 encryption both sides.
But this does not work? Anyone can provide any help

2 REPLIES
Franklyn
Frequent Advisor

Re: Configuring IAS and using radius authentication for nortel baystack 5510

Hi Partha,

I am afraid this is the wrong forum for Nortel, this is a HP Forum, unless someone else experience of Multivendor products!

Good Luck,
Franklyn
Partha Chauhan
Occasional Visitor

Re: Configuring IAS and using radius authentication for nortel baystack 5510

Hi Franklyn,

Thank you for your response. I just saw a couple of queries regarding a similar issue hence posted the same.
Regards,
Partha