Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Connect 4 x 2910al best way?

Connect 4 x 2910al best way?

Hi!

How should I connect 2x 2910al-48 and 2910al-24 (located in two different rack close to each other).
All servers will be teamed to each pair of switches.
Is it stack all to one stack or use HP mesh or mstp ?
No routing, only L2 with different vlans.

Best Regards, Magnus
2 REPLIES
cenk sasmaztin
Honored Contributor

Re: Connect 4 x 2910al best way?

hi magnus

your switch don't support hp mesh,hp mesh support only 5400,3500 series
mst (multiple spanning tree ) for use many vlan

in this case you can rstp config for L2 redundancy

cenk

MullT
Frequent Advisor

Re: Connect 4 x 2910al best way?

Hm, I always thought that only with MSTP it is possible to build a ring and L2 redundancy?