Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Connecting NC522SFP to 5400zl Switch

Ian Tasney
Occasional Visitor

Connecting NC522SFP to 5400zl Switch

I can find very little information about the specications and connectivity of HPs Direct Attach Cable.

To connect a DL370G6 to a 5400zl is it as simple as connecting one (or both) ports of an NC522SFP NIC into a J9309a 4 port module using a Direct attach cable. Does the DAC cable plug directly into the NIC on one end and the module on the other?
1 REPLY
Holger Hasenaug
Trusted Contributor

Re: Connecting NC522SFP to 5400zl Switch

Yes, it is as simple as that. Just look at the picture of a cable attached.