Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Connecting two different FC switches

ROSS HANSON
Regular Advisor

Connecting two different FC switches

Hello,

I have a primary FC switch (8/20q AK241A)  and a second FC switch (Brocade silkworm 200E).    I have port 11 of the 8/20q connected to port 3 of the silkworm and I have "turned on"  port 11 of the 8/20q to be a Tranparent Router (TR).      

 

On the silkworm port 3 shows the connection to the 8/20q switch.   But on the 8/20q switch it does not show the connection of the silkworm switch.    

 

On the 8/20q I have gone into "TR Mapping Manager"  and nothing shows, as far as a WWN of the silkworm switch.      Is there a step I am missing???

Ross Hanson