Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Console Problem w/ ProCurve 2524

Greg M.
Occasional Visitor

Console Problem w/ ProCurve 2524

I'm having problems consoling into my ProCurve 2524s. I have tried numerous settings with hyperterminal, different cables, verified port works, reset/clear to factory settings, and still I can't seem to get a serial console connection to two new switches I bought. Any ideas?
3 REPLIES
Greg M.
Occasional Visitor

Re: Console Problem w/ ProCurve 2524

The problem might be my laptop (nc8430), once I tried on a different model I didn't experience problems?
Matt Hobbs
Honored Contributor

Re: Console Problem w/ ProCurve 2524

Try Teraterm pro instead: http://www.ayera.com/teraterm/
Mark Castle
Advisor

Re: Console Problem w/ ProCurve 2524

I've often found that if you connect at 9600 for example then don't logout from the session properly then the next time you try to connect at a different speed then various HP switches don't auto sense the console speed correctly and as a consequence you can only connect again at 9600.