Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Creating Link aggregation between 2 switches using LACP

Shadow13
Respected Contributor

Creating Link aggregation between 2 switches using LACP

is there any configuration changes on the switches configuration when creating LACP trunk between 2 switches using wireless bridges ?

1 REPLY
Ralf Krause
Frequent Advisor

Re: Creating Link aggregation between 2 switches using LACP

Hi Shadow13,

not necessarily. But I would recommend to enable UniDirectional Link Detection (UDLD - "link-keepalive"), since you will not physically detect a link loss on the switch port, when the wireless signal gets stuck.

Regards,
Ralf