Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

DEC Server 90 M and LAT Protocol

SOLVED
Go to solution
Tenorio
Advisor

DEC Server 90 M and LAT Protocol

Hi
I have a dec server 90 M of Digital, using a LAT protocol to connect some devices and this dec server is connected in a network. To connect the dec server in a network I am using a bnc cable, and the dec server is connected in a dec repeater Ditigal. This equipaments are stacked. So I would like to connect the dec server 90 m in a other network using a TP cable and a 3com Switch. It's possible ?
2 REPLIES
Allan Bowman
Respected Contributor
Solution

Re: DEC Server 90 M and LAT Protocol

Yes, you should be able to do this. The 90M has a 10baseT port on the front that should enable you to connect it to your 3Com switch. Here is a link to the 90M manual: http://vt100.net/dec/dsrvh-om.pdf

Good luck!

Allan in Atlanta
Tenorio
Advisor

Re: DEC Server 90 M and LAT Protocol

Hi,

Thanks a lot for your informations. Best Regards.