HPE Community
Switches, Hubs, and Modems
1753328 Members
5065 Online
108792 Solutions
New Discussion юеВ

Re: Date and time

 
ManjunathBlr
Occasional Contributor

тАО06-13-2007 06:55 PM

тАО06-13-2007 06:55 PM

Date and time

how to set a Date and time in HP procurve 2650 switch
0 Kudos
2 REPLIES 2
Jonathan Axford
Trusted Contributor

тАО06-13-2007 07:26 PM

тАО06-13-2007 07:26 PM

Re: Date and time

Hi

You can either use an SNTP server or manually set the date and time.

To manually set the time: (example)

time 9:45 11/17/02
You can use the 'Time Timezone' command to set the timezone that you are in.

YOu can specifiy SNTP servers using

SNTP server 1.1.1.1
SNTP unicast / broadcast
timesync sntp

Hope this helps

Jonathan
Where there is a will there is a way...
0 Kudos
ManjunathBlr
Occasional Contributor

тАО06-13-2007 07:47 PM

тАО06-13-2007 07:47 PM

Re: Date and time

thanks , i just solved the problem,
used the config command , comfig time and the format which is specified in the help option.

thnaks again for replying me.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.